Essence We.R Uživatelská příručka Strana 123

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 291
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 122
Installation of the WeR@Home™ System
System User Guide
123
demonstrated in Figure 93 above.
2. Use a flat screwdriver to remove the punch-outs (see Figure 93 above).
3. Place and hold the base on the desired mounting location and mark the drilling locations (the above-
mentioned punch-outs).
4. Drill the holes; insert three (3) dowels if needed, place the base over them and screw in the three (3)
screws.
3.9.2.3 Installing with Pre-attached Double-side Tape
1. Release the Indoor Siren mounting base (above Figure 92).
2. Peel the tapes’ protective covers.
3. Attach the mounting base to its designated location while applying slight pressure.
4. Slide the Indoor Siren into the mounting base.
3.9.2.4 Dismounting the Indoor Siren
For dismounting Siren from its designated installation site (i.e. in case of battery replacement):
1. Press over the tab
2. Slide the Indoor Siren body upwards as demonstrated in Figure 120 below.
Zobrazit stránku 122
1 2 ... 118 119 120 121 122 123 124 125 126 127 128 ... 290 291

Komentáře k této Příručce

Žádné komentáře